For what motorists tint the cars? Some for this purpose to be allocated from crowd, some for protection against sunshine and bright headlights of oncoming cars. Anyway, in there are a lot of pluses and to you to speak to me about them.
Unfortunately, quite recently there was a law which forbids to tint car windshields. But there is no need to be upset as there is a way out.
Some handymen thought up removable toning, to make which in house conditions does not make big work! What represents this magic invention?! It is the simple sheet of thin, transparent plastic on which the tonirovochny film is glued. We now will consider process of production and installation. We will consider only process of production of forward lateral glasses!
For production of removable toning it will be required to us:
- Sheet PAT or rigid PVC 0,5-0,8 mm thick. It is no more and not less as if to take thickness, plastic will badly come under a sealant, glass simply will not open and will not be closed. Plastic can be got in any advertizing company of your city or in shop where sell polycarbonate.
- Curve of glass of your car. We will consider process of production of a curve slightly below.
- Tools. The edge, is desirable industrial with the handle holder. Scissors which will be able to cut without effort our plastic, a vygonka for smoothing of a film (rubber and plastic), a pshikalka with soap solution (a proportion of 4 drops of shampoo on 0,5 l of water).
- Tonirovochny film.
Production of removable toning
For a start you need to make a curve of glass
of your car. For this purpose it is possible to go to the nearest automobile shop and to ask the seller to give you glass for a couple of minutes then accurately to paste to it on a bilateral adhesive tape a leaf of a Whatman paper and to outline glass. After glass is outlined, to cut off a Whatman paper on a contour – the ready curve of glass of your car turns out.
If in shop you glass are not given, it is possible to go to the closest point of dismantling of cars and to ask for them, I give a guarantee that they will not refuse to you!
If such point of dismantling of cars is not present, it is possible to remove glass from your car and to outline it, it is simpler. How to remove glass, I will not tell as for each car this process happens differently. Anyway, you can find this information in the Internet.
Some write that it is possible to remove a curve without removing glass. But to receive the exact size of a curve at you it will not turn out, it is checked on experience. And the principle of such way is simple, it is necessary to put simply a tracing-paper or a tonirovochny film on wet glass of the car, to smooth and cut off along sealants, then turned out, to transfer to a leaf of a Whatman paper. I do not advise you to use this method as you risk to spoil plastic, and it not cheap.
Now, after our curve is ready, we start production of plastic preparation
. For this purpose we take the sheet PET or rigid PVC and we put it on an equal surface. Then we put our curve on plastic and on a contour we outline a felt-tip pen or a gel pen, the main thing that the line well it was visible. That the curve was not displaced, I advise readers Mirsovetov to paste it on a bilateral adhesive tape.
Then we clean a curve and we cut off plastic scissors on the line. Cut accurately not to cut off superfluous, differently it will turn out not really beautifully!
Now at us the preparation precisely similar to glass of your car turned out.
We begin toning process
. The protective film is applied on plastic from both parties. Tear off it on the one hand, one preparation with left, another spravy. We will apply toning on this place. Then take a tonirovochny film and apply it to your preparation, without unsticking from it a protective layer, previously having moistened a film and preparation with soap solution.
Further moisten a film with soap solution and smooth it on your preparation with a rubber vygonka that the film densely lay down to preparation.
Take an edge and it is accurate, on a preparation contour, cut off a film.
Then take a film which you cut off on a contour and very accurately remove from it a protective layer that the sticky party did not concern foreign subjects.
Clear soap solution a surface of your preparation (previously having removed from it a protective layer) that on it there was no dust and fat. Plentifully moisten the sticky party of a tonirovochny film and preparation with soap solution.
Then apply a tonirovochny film the sticky party on preparation.
After a film on a place, plentifully sprinkle a little it soap solution from above.
Take a rubber vygonka and, beginning from the middle, distil water from under a film. Then do the same, only already using a rigid vygonka.
After all above the specified actions at you the exact copy of glass of your car has to turn out.
I pay attention of readers Mirsovetov that the finished product has to stand in a warm place not less than 2 days, for this purpose that the tonirovochny film up to the end dried. If not to make it, at installation of removable toning the film will get down and will deteriorate.
Let's consider installation process now! Here everything is simple: take the dried removable toning and insert between a sealant and glass, as shown in a photo.
As you can see, removable toning strongly zerkalit, but this problem too is fixed. Buy glycerin in a drugstore and evenly smear it on glass, then establish removable toning. The effect of smooth surface will disappear instantly! Glycerin easily washes off so be not afraid of it to apply.
On it everything, now you can go with tinted glasses, without being afraid to receive for it a penalty as removable toning easily is removed.