Articles 
Hi-Tech
Cars
Business and finance
Household appliances
House and apartment
Medicine
Fashion and style
Psychology
Miscellaneous
Sport
Tourism
Digital equipment
Interior design   Pets   Cookery   Furniture   Plants   Repair and finishing   Bathroom equipment   Make   Family   Household goods   
Navigation
Advertizing

How to choose the mixer

Whether you were going to change simply the bathroom equipment, at you something broke or started repair – these councils will help you to choose the new mixer. There is information on a design of mixers, areas of their application, materials for their production. InfoAdvisor.net will prompt how to choose the mixer, on what to pay attention about what to ask the seller.
It, as it is known water. And a water source in our houses – the crane. To gather waters. Where? – In the crane. It is the very first association. It is so obvious that can compete to the door handle or the electric switch. We address to it not much less often. But water not simply in the crane, and in the mixer. In the device where the hot mixes up with cold because life without hot water it, excuse, not life any more.
Whether you were going to change simply the bathroom equipment, at you something broke or started repair – these councils will help you to choose the new mixer. There is information on a design of mixers, areas of their application, materials for their production. But not only it. InfoAdvisor.net will prompt how to choose the mixer, on what to pay attention about what to ask the seller. If do not find the answer to the question interesting you here, will precisely know about what to ask, and already a half put it.

Design of mixers

The design can be the most various: from two combined cranes with hot and cold water to any unimaginable work of art of the Italian masters. InfoAdvisor.net will in detail stop on consideration of the most widespread mixers and their design.
Fir-tree
Cмеситель Ёлочка The simplest design of the mixer – "fir-tree" is two combined the crane axle box. And between them – having poured out or "gander", direct or curved from which water flows. It can be motionless or has opportunity to rotate.
Regulates water supply in such mixer the gate (in bathroom equipment the crane axle box, in life we call the crane). The traditional device which hides in itself and traditional minuses of operation. And everything begins very simply. There is a wish to close honestly after itself water, but anything it is impossible. The gate simply does not want to be closed up to the end.
Such very often occurs if rubber laying is used. From effect of hard water or for other reason it was deformed and adjoins densely. Therefore, we discover water – then we close, to desirable result. And it is not present. Each of us at least once in life turned the crane. Sometimes for this purpose many efforts are not required. Chick – it is also ready. But there are devices more reliable where anything it is not necessary "to twist".
The ceramic insert is more durable since it is steady against changes of temperature and chemical influence of water, provides reliable tightness as rubber, but "is afraid" of water pollution by mechanical inclusions.
One-lever mixer
Однорычажный смеситель Other design – the one-lever mixer (joystick) – continues to occupy actively our dwellings. In the device and adjustment the mixer is simple and reliable. Two spherical surfaces are combined with openings in the necessary situation for change of a pressure and water temperature. These surfaces are combined rather densely and at the same time are consolidation. Usually it is two ground-in ceramic-metal plates, in more economic execution – plastic. When using everything is intuitively clear. And any additional consolidations.
Wall mixer
One more design – the wall mixer. It is rigidly connected to water pipes. And adjustment of a pressure and water temperature is carried out the crane axle boxes or the lever. Having poured out, can be same, as well as two other designs. Depends on the concrete mixer.
Настенный смеситель The aerator is built in in having poured out the mixer for formation of an accurate stream of water. In an ideal has to form an accurate stream both at small, and at big giving. But demands periodic cleaning since can get littered with deposits and mechanically inclusions. And differently will cease to carry out the direct appointment, and water will splash in different directions.
For some reason it is considered to be that "fir-tree" is only for kitchen, but it not so. Simply to establish it on a sink more simply. But this design can be established and on a bathtub side, with the same success. The same with a one-lever design. The shower can be built in any of them.
Generally any of the described designs can be established both in kitchen, and in a bathroom. Without exception. The difference can be in connecting sizes. The kitchen does not require such big giving and a pressure of water as for a bathroom, means pipes of smaller diameter there. Means and mixers will have different connecting sizes. It concerns also the sizes of an izliv. For a sink and a wash basin – the small length and small diameter, for a bathtub – having poured out more long and bigger diameter. The mixer case for a bathroom massivny more strongly even by sight.
Installation of the wall mixer demands only additional costs of works on installation: to sort a wall, to remove pipes and to hide them. Who told that it cannot be made in kitchen. It is possible to establish an easy plastic partition instead of immuring pipes in a wall and to put on it a tile. It is possible to save money if you stopped the choice on the wall mixer on it.
In shops the choice is huge. To you will propose so many ready constructive solutions, including on installation what it is necessary to consider already nothing. So you will need only to make a choice according to your financial opportunities.

Materials

Как выбрать смеситель Materials theoretically it can be applied quite a lot. But mixer not the car, but thing simple and simple. Therefore in practice of materials for their production not so there is a lot of. Some metal alloys, are a little plastic, ceramics. In separate exotic cases it can be even a stone or a tree. Here, generally and all. The choice of these materials is caused both safety of use, and technological effectiveness of production. Well and appearance, of course.
From what materials were used at production of the mixer, of course, also its price will depend. InfoAdvisor.net suggests you to learn how use of this or that material, influences on quality of production and its operational properties.
Metal
From metals, to be exact the mixer case is made of alloys. Other details can also be metal or from other material.
Alloys traditional and all known – brass and bronze. Surfaces of details of the mixer – chromeplated. These materials are neutral to the water environment, and the mixers made of them are calculated on long terms of operation. They not so strongly become soiled mineral deposits, i.e. do not grow from within. In general with them a minimum of problems. Also it is the best option for fasteners and adapters, if not obligatory.
Как выбрать смеситель Alloyed steel in production of mixers are applied a little less than brass. They it is more difficult in processing and a thicket become soiled during service life. Though it depends on each concrete mixer and purity of water.
Alpax – one of unsuccessful examples. It is an aluminum alloy with silicon. Material, cheap and convenient for molding. But only he quickly grows old and becomes fragile. And appearance of the mixer from alpax leaves much to be desired.
Therefore we come back to traditional materials. Personally I prefer this option: that can be better than the reliable bronze mixer with brass carvings. Yes he will endure me, and, above all – will not draw to himself excessive negative attention.
Plastic
There are obvious pros and cons, looking what to discuss. It is technological and inexpensive material which easily "adapts" under need of production of the mixer. It easy and strong. Does not grow and is chemically neutral in relation to water. Has low heat conductivity that is important, especially if mixer details strongly heat up in operating time.
But in service life after all loses to metals. First, because of smaller durability. Though which details of your mixer are made of plastic. If flywheels of gates or the lever in a one-lever design – it is normal.
Выбор смесителяCeramics
Almost same history, as with plastic. But there are also distinctions. Agree that by sight and to the touch it is much more pleasant and more convenient. But besides to metal not the competitor. Flywheels – it is good, and the rest? On my eyes when switching on a shower the ceramic case of the mixer burst and arranged me small extraordinary bathing. Low-quality production or the cracks which arose at careless use can to it the reason, but them it was not noticeable. With the same ease you can get from a sink in kitchen a big pan with water and incidentally strike on a gate flywheel.
Coverings
Chromeplated and enameled. All saw, all know. Both that, and another has rather attractive appearance though the main objective is a protection against corrosion and mechanical damages. Enamel is applied on a metal surface, as well as chrome. And here to cover with chrome plastic at first apply copper on it.

Types of connection of mixers

We connect the fir-tree mixer
Such type of the mixer has characteristic design feature for fastening. For what "fir-tree" from below has a grip – the cutting plug with a carving. On this branch pipe the nut which the mixer fastens to a sink screws on. And is farther to a water supply system through a grip.
This way of fastening inconvenient and unreliable. After a while your mixer starts "dangling" on the fixed surface. It is only required to tighten a nut, but it often sours and it is heavy to twist it. And it will be safer to disconnect the mixer from a water supply system for what it is necessary to block water in kitchen at first.
We connect the one-lever mixer
Way of its fastening traditionally another. From below on the case of the mixer carving openings are located: for fastening and connection to a water supply system. For fastening the hairpin, a semi-washer and a nut is used. At first the hairpin (from below) is twisted in the installed mixer, then on it the semi-washer attacks and is attracted by a nut.
Connection to a water supply system can be "flexible" or "rigid". In the first case are flexible hoses in a metal braid, in the second – copper tubes with collet clips.
We connect the wall mixer
Features of connection to a water supply system of such mixers following. Here supply not vertical, but horizontal. And only rigid connection. He unites to pipes by means of special eccentric adapters. It allows to compensate a difference of interaxal distance of the mixer and the pipes removed for connection. Pipes thus can be removed outside or walled in a wall. On your discretion.

In the course of a mixer choice

Как выбрать смесительChoice of the kitchen mixer
First of all, it has to correspond to the sink sizes. To be compact and it is convenient to take place, approach on it, eventually, on style. Having poured out optimum has to reach the middle of a sink and have opportunity to turn. Otherwise it will be extremely difficult to use a kitchen sink. Traditionally InfoAdvisor.net recommends "fir-tree" or the one-lever mixer since they easily are established on a sink and do not demand additional expenses.
Mixer choice for a bathroom
With sizes and style, generally clearly. In a bathroom often install wall mixers if the chosen bathtub is not adapted for installation on it other types of mixers. It is better if the chosen design has the massive case and short having poured out big diameter. It means that at a big pressure of water you will be able quickly to gather a bathroom. And having poured out to you will not disturb.

The main general council at a mixer choice – do not pursue low cost. Good, as we know, do not cost small money. And that the mixer is made in Germany or Italy does not say yet that it qualitative. And the Bulgarian, for example, producers to surprise as the acceptable price, and quality.
Visit some shops. The choice of mixers is huge. Try to learn obzorno as much as possible, and then narrow a search circle. It is possible that business will not be limited one-two days, but to hurry not in your interests. Only the seller needs to send quickly you home with purchase. Having avoided unnecessary expenditure, you undoubtedly will remain are happy.
Upon purchase be interested in the following questions:
  • existence of the certificate;
  • conditions of guarantee maintenance;
  • complete set.
Installation of the mixer if you not the professional, is better not to be engaged. Take an interest in shop in this question. And if did not receive necessary information, address to the familiar plumber or ask relatives and friends to recommend to you the skilled master.
Read also
New articles
It is interesting

This tree (sequoia) was cut in National park of Sequoia, 1892.